Light & Engineering 31 (1)

Volume 31
Date of publication 02/17/2023
Pages 94–99

Purchase PDF - ₽450

Visual Comfort at the Road Lighting on the Border Line L&E, Vol.31, No.1, 2023

Articles authors:

Sakir Parlakyıldız

Sakir Parlakyıldız, M. Sc. He is a Ph.D. student in Firat University, faculty of engineering, department of electrical and electronics engineering. He currently works as a lecturer at Bitlis Eren University, Vocational school of technical sciences, department of biomedical device technologies

Abstract:

Today, the most important factor in terms of border security is the safe observation of the officers at the border police stations and increasing the visibility of those who may cross without permission. Road lighting along the border is one of the most important physical parameters in preventing unauthorized crossings. If there is a large number of people crossing a border and this crossing cannot be stopped, states create a physical barrier by building a wall of concrete blocks on this border. However, this limit needs to be protected and observed. For this purpose, road and lighting installations are installed on the said country border for security purposes. The main purpose of the road lighting extending along the border is to increase the visibility of pedestrians and other objects and to prevent unauthorized passages safely by the security guards who patrol this area. Therefore, for good border road lighting, vision conditions should be improved, taking into account safety needs. Correctly provided border road lighting is a deterrent in preventing unauthorized border violations. Optimum road lighting along the border will also make the border guards working in this environment feel safe. In this study, according to the road lighting criteria specified by the International Commission on Lighting (CIE), the visual conditions on the road along the border were analyzed and solutions for lighting were presented.

References:

1. Van Bommel, W., Van Den Beld, G.,. Van Ooyen, M., 2003. Industrial Light and Productivity // Light & Engineering, 2003, Vol. 11, #1, pp. 14–21.
2. Efe, S.B., Varhan, D. Interior Lighting of a Historical Building by Using LED Luminaires A Case Study of Fatih Paşa Mosque // Light and Engineering, 2020, Vol. 28, #4, pp. 77–83.
3. Cengiz, M.S. Simulation and Design Study for Interior Zone Luminance in Tunnel Lighting // Light and Engineering, 2019, Vol. 27, #2, pp. 42–51.
4. Cengiz, M.S., Cengiz, C. Numerical Analysis of Tunnel LED Lighting Maintenance Factor // IIUM Engineering Journal, 2018, Vol. 19, #2, pp. 154–163.
5. Aizenberg, J.B., Budak, V.P. The science of light engineering, fields of application and theoretical foundations // Light and Engineering, 2018, Vol. 26. pp. 4–6.
6. Cengiz, M.S. The Relationship between Maintenance Factor and Lighting Level in Tunnel Lighting // Light and Engineering, 2019, Vol. 27, #3, pp. 75–88.
7. Cengiz, M.S. Effects of Luminaire Angle and Illumination Topology on Illumination Parameters in Road Lighting // Light & Engineering, 2020, Vol. 28, #4, pp. 47–56.
8. Parlakyıldız, S. The Effects of Luminaire Glass Type on Road Parameters in Road Lighting // Light & Engineering.
9. Cengiz, M.S. The Interaction of Daylight with Design and Place in Religious Buildings According to Modern Architecture // European Journal of Science and Technology, 2022, Vol. 35, #4, pp. 195–202.
10. Ferencikova, M. and Darula, S., Availabity of Dayligting in School Operating Time // Light & Engineering, 2017. Vol. 25, #2, pp. 71–78.
11. Cengiz, MS. Effects of Luminaire Angle on Illumination Performance in Tunnel Lighting // Balkan Journal of Electrical and Computer Engineering, 2019. Vol. 7, #3, pp. 250–256.
12. https://www.cnnturk.com/turkiye/suriye-sinirinaorulen-duvara-kulekol-destegi?page=11.
13. https://www.gzt.com/jurnalist/dunyanin-enuzun‑3uncu-duvarina‑21-kulekol‑2796047.
14. https://www.hurriyet.com.tr/galeri-turkiyenin-suriye-sinirina-ordugu-duvar‑40383018/2.
15. Aizenberg, J.B., P. Budak, V.P. The Science of Light Engineering, Fields of Application and Theoretical Foundations // Light & Engineering 2018, Vol. 26, # 3, pp, 4–6.
16. Maghe, L. Characterization of Road Surfaces using a Mobile Gonio-reflectometer // CIE International Symposium on Road Surface Photometric Characteristics, 2008, 16 p.
17. Budak, V.P., Grimailo, A.V. Light reflection from real surfaces: Probabilistic model of the layer radiance factor // CEUR Workshop Proceedings, 2020, 2744.
18. International Commission on Illumination, Road lightings as an Accıdent Countermeasure, CIE93, Vienna-Austria, 92 (1992).
19. CIE140:2000 – Road Lighting Calculations. CIE140, International Commission on Illumination, Road Lighting Calculations, Vienna-Austria, 33 (2000).
20. CIE140:2019 Road Lighting Calculations. CIE140, International Commission on Illumination, 2nd Edition ISBN: 978–3–902842–56–5.
21. CIE2011. CIE194:2011. On site measurement of the photometric properties of road and tunnel lighting.
22. CIE194–2011: On site measurement of the photometric properties of road and tunnel lighting, 2011.
23. CIE115–2010 (CIE2010) CIE115, International Commission on Illumination, Recommendations for the Lighting of Roads for Motor and Pedestrian Traffic, Vienna-Austria, 1995, 25.
24. CIE136–2000, Guide to the lighting of urban areas, 3 August 2000.
25. Basov, A.Y., Boos, G.V., Budak, V.P., Grimailo, A.V. Numerical-analytical model of the luminance factor of an arbitrary surface // Proceedings of the Conference CIE2021, OP54, pp. 423–430.

Keywords

DOI: https://doi.org/10.33383/2022-100

Buy