Currently, insulated glass units (hereinafter abbreviated as IGU) are the main type of translucent filling used in curtain walls. Under the influence of climatic loads in IGU, the thickness of the inter-glass space changes, leading to the deformation of the glasses. Deformations of glass lead to optical distortions on curtain walls. The paper considers the technical solutions used in the existing engineering practice to reduce the distorting curvature of IGU: the use of more rigid external glasses as part of IGU, the use of double-skin facades with external independent single glass, the use of vacuum IGUs. A new method is proposed to reduce the distorting curvature of IGUs by fixing the thickness of the interglass space. It is achieved by installing other point or linear supports between the panes. The introduction of other supports solves the problem of reducing deformations only when IGU is compressed. When the interglass space is expanded, the supports are turned off from operation and the glass is freely deformed. Therefore, to avoid such deflections, it is necessary to pre-compress the IGU under a load equivalent to the climatic load on the IGUs operating in the construction area of the object. Calculations show that for the climatic conditions of the city of Moscow, the required degree of rarefaction the interglass spaces is only 5 % of the absolute atmospheric pressure.
1. Boriskina I.V. Buildings and Structures with Translucent Facades and Roofs. Theoretical Bases of Designing of Glass Constructions / Sankt-Peterburg, Lyubavich, 2012. 396 p.
2. Plontikov A.A. Architectural and engineering principles and innovations in the construction of glassfacade buildings // Vestnik MGSU, 2015, # 11, pp. 7–15.
3. Konstantinov A., Borisova, M., Lambias Ratnayake, M., Arcibasova, T. Design and calculation of energy efficient windows of high-rise building // E3S Web of Conferences, 2019, Vol. 110, 01005 p.
4. Konstantinov A., Safiullov, T. Energy-efficient installation of windows in multi-storey residential buildings // IOP Conf. Series: Materials Science and Engineering, 2018, Vol. 365, 022017 p.
5. Behr R.A. Architectural glass to resist seismic and extreme climatic events // Woodhead Publishing Limited and CRC Press, 2009, 260 p.
6. Konstantinov A., Mukhin, A. Providing thermal protection when replacing window blocks in historical buildings // IOP Conf. Series: Earth and Environmental Science, 2018, Vol. 177, 012017 p.
7. Konstantinov A., Mukhin A. Architectural possibilities of using PVC window units in historical buildings // MATEC Web Conf, 2018, Vol. 193, 04018 p.
8. Melnikova I., Boriskina P. Modern translucent structures in multistory residential buildings // IOP Conf. Series: Materials Science and Engineering, 2018, Vol. 365, 022021 p.
9. Magay A.A., Dubynin N.V. Translucent facades of high-rise multi-functional buildings [Svеtoprozrachnyе fasady vysotnyh mnogofunkcional’nyh zdanij] // Vestnik MGSU, 2010, #2, pp. 14–21.
10. Tikhomirov A., Konstantinov A., Kurushkina K., Lambias Ratnayake M. Conception of a complex window design method // E3S Web of Conferences, 2019, Vol. 91, 05018 p.
11. Güsgen J., Sedlacek G., Blank K. Mechanical fundamentals for the design of structural glass members // Stahlbau, 1998, Vol. 67, # 4, pp. 281–292.
12. Poirazis H. Double Skin Facades for Office Buildings. Division of Energy and Building Design Department of Construction and Architecture Lund Institute of Technology Lund University. Lund // Sweden, 2004, pp. 14–15.
13. Derbina S.N., Boriskina I.V., Plotnikov A.A. Evolution of translucent facades design solutions // Vestnik MGSU, 2011, # 2, pp. 26–35.
14. Stratiy P., Klykov I. Vacuum glazed units – energy efficient glazing // IOP Conf. Series: Materials Science and Engineering, 2018, Vol. 365, 032013 p.
15. Plotnikov A.A., Stratiy P.V. A method of manufacturing glass // Patent RF 2530857.2014.
16. Stratiy P.V., Plotnikov A.A. Climate load windows // Vestnik MGSU, 2011, Vol. 2, #2, pp. 262–267.
17. Tibolt M., Hechler O., Odenbreit C. Analytical extension of a climate load model for undercut point fitted IGU // Proceedings of the Challenging Glass 4 and Cost Action TU0905 Final Conference, 2014, pp. 199–208.
18. Stratiy P.V., Luchkin E.A. Reducing the distorting curvature of glass packets due to partial rarefaction of internal air // Industrial and Civil Engineering, 2016, # 4, pp. 54–58.

• Previous article
• Next article

• insulated glass unit
• IGU
• distorting curvature
• optical distortions
• climatic load
• atmospheric pressure