Sergei V. Stetsky, Kira O. Larionova
Pages 50–56
-
The article deals with the problems of desired prolongation of insolation in premises of residential buildings. Following factors, affecting the procedure, are being analysed: the position of a building considered within the context of an urban development, the size and volume of buildings in question of surrounding objects and huge plastics of facades. Moreover, the planning solution of residential buildings floors and their part in the insolation process creation are being discussed too. The conclusions from the studies, which are the fundamentals for the article, considered let us to make some useful recommendations, aimed to improve, or at least, to optimum the insolation process in residential buildings in modern urban conditions. In particular, the duration of insolation can be increased by using bay windows more widely. However, this requires more complex architectural and structural solutions for external walls with large plastic elements. The shading effect of bay windows themselves can be eliminated by increasing the spacing of their placement on the facades, using large panoramic windows between them and, in some cases, by switching to a free, asymmetrical layout of building floors. The duration of insolation can also be increased by various urban planning measures, reducing the height of the surrounding buildings or, conversely, developing them in height, thereby reducing the area of development of individual buildings. In addition, it is advisable to divide the volumes of buildings into two main functional zones: the lower public and upper residential. A higher location of the residential functional zone allows one to observe a longer trajectory of the Sun in its premises and, consequently, a longer duration of insolation.
More -
1. Gusev, N.M. Fundamentals of Building Physics [Osnovy stroitel’noy fiziki] // Moscow, Storoyizdat, 1975, 440 p. 2. Solovyov, A.K. Physics of the environment [Fizika sredy] // Moscow, ASV, 2014, 341 p. 3. Twarowski, M. The sun in architecture [Solnce v arhitekture] // Moscow, Stroyizdat, 1977, 287 p. 4. Harkness, E., Mehta, M. Regulation of solar radiation in buildings [Regulirovanie solnechnoj radiacii v zdaniyah] // Moscow, Stroyizdat, 1984, 176 p. 5. Stetsky, S.V. Comparative analysis of the functional characteristics of sunscreens for civil buildings in a hot and sunny climate [Sravnitel’nyj analiz funkcional’nyh harakteristik solncezashchitnyh sredstv dlya grazhdanskih zdanij v uslovnyh zharkogo i solnechnogo klimata] // Svetotechnika, 2017, # 3, pp. 29–33. 6. Stetsky, S.V. Stationary sunscreens as the factor of architectural expressiveness of buildings and provision of comfortable micro-climate indoor regimes in their rooms for hot sunny climate conditions [Stacionarnye solncezashchitnye sredstva kak faktor arhitekturnoj vyrazitel’nosti zdanij i obespecheniya komfortnyh mikroklimaticheskih vnutrennih rezhimov v ih pomeshchennyh dlya uslovij zharkogo solnechnogo klimata] // Scientific review, 2014, # 7, pp. 572–579. 7. Stetsky, S.V., Larionova, K.O. To a problem of insolations lasting for residential premises, furnished with balconies and loggias [K voprosu o prodolzhitel’nosti insolyacii zhilyh pomeshchenij, snabzhennyh balkonami ili lodzhiyami] // Innovation and investment, 2020, # 5, pp. 231–233. 8. Gusev, N.M., Nikolskaya, N.P., Obolensky, N.V. Solar radiation and its accounting in modern construction [Solnechnaya radiaciya i ee uchet v sovremennom stroitel’stve] // Moscow, Scientific works of NIISF, issue 5, 1972, pp. 3–13. 9. Bakharev, D.V. About some drawbacks of SN 427–63 and modern requirements for hygienic regulation of natural exposure [O nekotoryh nedostatkah SN 427–63 i sovremennyh trebovaniyah k gigienicheskomu normirovaniyu estestvennogo osveshcheniya] // Lighting engineering, 1974, # 7, pp. 17–19. 10. Bakharev, D.V., Orlova, E.N. About rationing and calculation of insolation [O normirovanii i raschete insolyacii] // Svetotechnika, 2006, # 1, pp. 18–27. 11. Stetsky, S.V., Larionova, K.O., Chufarnov, R.S. Large-scale plastic of the surrounding buildings as a means of increasing natural illumination in buildings due to reflected light fluxes in a sunny climate [Krupnaya plastika okruzhayushchej zastrojki, kak sredstvo povysheniya estestvennej osveshchennosti v zdaniyah za schet otrazhennyh svetovyh potokov v usloviyah solnechnogo klimata] // Innovation and investment, 2021, # 2, pp. 153–155. 12. Solovyov, A.K. Mirrored facades: their impact on the lighting of opposing buildings [Zerkal’nye fasady: ih vliyanie na osveshchenie protivostoyashchih zdanij] // Svetotekhnika, 2017, # 2, pp. 28–31. 13. Sanitary Codes and Regulations – SanPin 1.2.3685–21 Hygienic norms and requirements to provide safety and/or harmless for a human being factors of live able environment [Sanitarnyye normy i pravila – San-PiN 1.2.3685–21 Gigiyenicheskiye normativy i trebovaniya k obespecheniyu bezopasnosti i (ili) bezvrednosti dlya cheloveka faktorov sredy obitaniya] // Moscow: Ministry of Health of Russia, 2021, 8 p. 14. SanPin 2.2.1 / 2.1.1 1076–01 (as amended on April 10, 2017): Hygienic requirements for insolation and sun protection of residential and public buildings and territories[SanPin 2.2.1/2.1.1 1076–01 (s izmeneniyami na 10 aprelya 2017 goda). Gigienicheskie trebovaniya k insolyacii i solncezashchite pomeshchenij zhilyh i obshchestvennyh zdanij i territorij] // Moscow: Ministry of Health of Russia, 2017, 8 p. 15. SP 370.1325800.2017: Sun protection devices for buildings. Design rules [SP 370.1325800.2017 Ustrojstva solncezashchitnye zdanij. Pravila proektirovaniya] // M.: Ministry of Construction of Russia, 2017, 74 p. 16. Stetsky, S.V., Larionova, K.O. Assessment of the insolation duration for the facades of buildings and adjacent territories under certain parameters of their development // Light and Engineering, 2021, Vol. 29, # 5(1), pp. 28–34. 17. Stetsky, S.V., Larionova, K.O., Averyanova, A.S., Stepanov, K.V. Optimal position of surrounding development object for providing normative insolation duration in the premises of buildings [Optimal’noe raspolozhenie ob”ektov okruzhayushchej zastrojki dlya obespecheniya normativnoj prodolzhitel’nosti insolyacii v pomeshcheniyah zdanij] // Economics of construction, 2023, # 4, pp. 201–203. 18. Larionova, K.O. Dependence of the duration of residential insolation on the plastic solution of building facades [Zavisimost’ prodolzhitel’nosti insolyacii zhilyh pomeshchenij ot plasticheskogo resheniya fasadov zdanij] // Economics of construction, 2024, # 5, pp. 363–365. 19. Dvoretsky, A.T., Morgunova, M.A., Sergeichuk, O.V., Spiridonov, A.V. Methods of fixed shading devices designing [Metody proektirovaniya stacionarnyh solncezashchitnyh ustrojstv] // Construction materials, equipment, technologies of the 21st century, 2018, # 11–12, pp. 6–10. 20. Buravchenko, V.S., Dvoretsky, A.T., Sergeychuk, O.V., Spiridonov, A.V., Shubin, I.L. Modern sunscreen devices. Сlassification of basic types [Sovremennye solncezashchitnye ustrojstva. Klassifikaciya osnovnyh tipov.] // Construction materials, equipment, technologies of the 21st century, 2018, # 1–2, pp. 54–56. 21. Spiridonov, A.V., Dvoretsky, A.T. Insolation and sun protection [Insolyaciya i solncezashchita] // Reference book on lighting engineering. Edition 4. Moscow, 2019, pp. 553–566. 22. Dvoretsky, A.T., Spiridonov, A.V., Shubin, I.L., Klevets, K.N. Accounting of climatic features in designing solar shading devices [Uchet klimaticheskih osobennostej pri proektirovanii solncezashchitnyh ustrojstv] // Svetotekhnika, 2018, No. 2, pp. 52–55. 23. Dvoretsky, A.T., Spiridonov, A.V., Shubin, I.L., Klrvets, K.N. Accounting of Climatic Features in Designing Solar Shading Devices // Light & Engineering, 2018, Vol. 26, # 2, pp. 162–166. 24. Dvoretsky, A.T., Sergeychuk, O.V., Spiridonov, A.V. Solar maps in the design of general sun protection devices [Solnechnye karty v proektirovanii solncezashchitnyh ustrojstv obshchego polozheniya] // Svetotekhnika, 2020, # 5, pp. 21–24. 25. Dvoretsky, A.T., Sergeychuk, O.V., Spiridonov, A.V. Application of Solar Maps in Design of General Position Shading Devices // 2020, Light & Engineering, Vol. 28, # 6, 2020, p.p. 105–109. 26. Dvoretsky, A.T., Spiridonov, A.V., Shubin, I.L. Low-energy buildings: Windows. Facades. Sun protection. Energy efficiency / Monograph. [Nizkoenergeticheskie zdaniya: Okna. Fasady. Solncezashchita. Energoeffektivnost’] 2022, 230 p. 27. Dvoretsky, A.T., Zavaliy, A.A., Spiridonov, A.V., and Shubin I.L. Estimation of insolation of the mirror hall of a unique building // Light & Engineering, 2022, Vol. 30, # 4, pp. 42–48. 28. Dvoretsky, A.T., Mitrofanova, S.A., Vybornova, T.V., Spiridonov, A.V. Duration of the cooling period and efficiency of sunlight protection // Light & Engineering, 2022, Vol. 30, # 4, pp. 49–55. 29. Dvoretsky, A.T., Mitrofanov, S.A., Vybornova, T.V., Spiridonov, A.V. Duration of the cooling period and the effectiveness of sun protection [Prodolzhitel’nost’ perioda ohlazhdeniya i effektivnost’ solncezashchity] // Svetotechnika, 2022, # 1, pp. 11–16.
More